FAQ
Home > FAQ

What Are the Special Requirements of High-Carbon Ferrochrome Furnaces for Electrode Paste?(2026 Edition)

Time:2026-10-30   Traffic:1127

Abstract

High-carbon ferrochrome (HCFeCr) is the grade that most "tests the formulator's skill" in electrode paste applications. There is only one reason: large ferrochrome furnaces are generally fully sealed, with almost no radiant or conductive heat, so resistance heat is the only heat source left for baking the electrode paste. This compresses the fault-tolerance margin of formulation design to an extremely narrow range.

Keywords|High-carbon ferrochrome (HCFeCr);fully sealed submerged arc furnace;resistance heat;current density; baking speed;ash content;compressive strength after baking;anti-segregation;cylindrical electrode paste;electrode paste unit consumption;furnace condition control

Last updated: 2026-10-30·Owner: Rongxing Group Technical Team

Content

1. The heat-source dilemma of sealed ferrochrome furnaces

2. Four special requirements for electrode paste

RequirementSpecific targetReason — why it is needed
Faster baking speedSoftening point at the lower limit (about 70–90 °C); volatile matter at the middle-to-lower limit (11–12.5%)The internal pressure and temperature of a sealed furnace are stable, while radiant and conductive heat are almost zero, so the paste must be made "easier to bake"; otherwise it remains under-baked
Lower ash contentAsh ≤ 4%High ash accelerates electrode consumption and shortens the baking residence time; it also contaminates the alloy
Higher strength after bakingCompressive strength ≥ 20–22 MPa, with the thermal expansion coefficient controlledElectrode paste with higher compressive strength can better withstand electrode accidents caused by burden impact, furnace-platform vibration and similar factors
Anti-segregation capabilityA reasonable particle size distribution to optimize the electrode paste structureMaintaining a proper paste consistency is more conducive to the structural density of the electrode after sintering and forming

3. The segregation problem of cylindrical paste (key point)

① Ensure that the formulation used in electrode paste production is reasonable, and maintain a proper paste consistency;

② extend the kneading time to improve uniformity;

③ appropriately increase the pitch content and fluidity;

④ modify the ribs of the electrode shell to improve temperature uniformity inside and outside the electrode.

4. Unit consumption and operating boundaries of ferrochrome furnaces

ItemReference value
Electrode paste unit consumption, high-carbon ferrochrome furnaceAbout 18 kg/t (advanced level after optimization: 15–17 kg/t)
Medium- and low-carbon ferrochrome furnaceAbout 19 kg/t (refining furnace; mostly uses graphite or carbon electrodes, and unit consumption is higher where paste is used)
Safe current of the electrode shellMust be strictly calculated; exceeding the limit will burn out the electrode shell below the "large sleeve", destroying protection and baking
Power restoration after an outageNever raise the load quickly; restore in stages according to the outage duration to avoid hard break caused by thermal stress

PREVIOUS:There is no more content!

NEXT:Electrode Paste Consumption and Furnace Condition Control of Ferrosilicon Furnaces (72# / 75#)(2026 Edition)

Honesty connects the whole world
Rongxing adheres to the business philosophy of sincerity. From strategy formulation to raw material procurement, business negotiations, and technical services, we never cheat.
公司Logo
  • Rongxing Group focuses on product quality and reputation. It is a group company integrating the production and operation of electrode paste and graphite electrodes.
公司Logo
Products
Connect
  • PhonePhone:+86 19937179450
  • WhatsappWhatsapp:+86 19937179450
  • EmailEmail:[email protected]
  • AddressAdd:Zhengdong New District,Zhengzhou City,China.
Email
Message
Whatsapp
TOP