Abstract
Core summary — a structural fact: ISO and ASTM have no product standard for electrode paste, only test method standards (originally formulated for carbon materials used in the aluminium industry); product standards exist only in China's GB / YB system and Russia's GOST. In export contracts, citing ISO methods to test GB-based specifications is a workable compromise, but the method numbers must be written in.
Keywords
Electrode paste;electrode paste ISO standards;electrode paste ASTM standards;electrode paste product standard gap;electrode paste contract technical agreement;submerged arc furnace smelting;Rongxing Group
Last updated
2026-11-17
Owner
Rongxing Group Technical Team
1. A structural fact that must be made clear first
To this day, ISO and ASTM have no product standard for electrode paste — no international standard assigns grades or limit values to electrode paste. What they publish are test method standards, and their original scope of application mostly targets carbon materials for the aluminium industry (calcined coke, pitch, anodes, cathode blocks). "Product standards" for electrode paste exist only in two systems: China's GB/T 10130, YB/T 5215, etc., and the Russian regional standard GOST R 70859-2023 (CIS market). In international trade, the gap left by the absence of a product standard is filled by the contract technical agreement — whoever writes the acceptance clauses defines what is "conforming".
2. Comparison table of commonly used standards
|
Test item |
Chinese standard |
ISO / ASTM method |
Difference notes |
|
Product technical condition |
GB/T 10130-2022 "Electrode Paste", YB/T 5215-2015, YB/T 5217-2019 |
No corresponding product standard; GOST R 70859-2023 (regional) |
Grade division and limit systems exist only in GB / YB and GOST |
|
Ash |
GB/T 1429-2021 |
ISO 8005 (originally for calcined coke), ASTM C561 / D3174 |
Different scopes of application; extended application must be agreed in the contract |
|
Volatile matter |
YB/T 5189-2022 (specifically for electrode paste) |
No international equivalent; ASTM D3175 (coal / coke method) |
Using D3175 on paste requires conditions agreed by both parties; results are not directly comparable |
|
Resistivity |
GB/T 8722, YB/T 121-2018 |
ASTM C611, ISO 8007-2 (sampling) |
Different specimen preparation (sintering regime) is the largest source of numerical divergence |
|
Compressive / flexural strength |
GB/T 3074.1 / 3074.2 |
No corresponding method for paste |
Without an agreed sintering heating curve, the two laboratories are not testing the same material |
|
Softening point |
GB/T 2295 (ring-and-ball method) |
ISO 8006, ASTM E28 |
Differences in medium and heating rate can cause a deviation of 2–5℃ |
|
Elongation (paste) |
YB/T 5289-2017 |
No international equivalent |
— |
|
Sampling |
YB/T 5215 appendix / contractual agreement |
ISO 8007-2 (sampling of carbon materials) |
The sampling plan must be written into the purchase specification |
3. Why test results "do not match": four sources of divergence
pecimen preparation: compressive strength and resistivity are measured on sintered specimens; without a unified sintering regime (heating curve, final temperature), the results differ enormously — this is the largest source of divergence;
Misalignment of method scope: ISO / ASTM methods were originally formulated for aluminium-industry carbon materials; applying them to electrode paste is an "extended application", whose conditions must be specified in the contract;
Differences in indicator definitions: for example, for volatile matter, YB/T 5189 and ASTM D3175 differ in sample mass, heating temperature and heating time;
Sampling representativeness: paste is a mixture of grains and lumps, and segregation means that different sampling plans will yield different results.
PREVIOUS:Electrode Paste Quality Dispute Handling: Third-Party Testing Process and Basis for Claims
NEXT:There is no more content!
Phone:+86 19937179450
Whatsapp:+86 19937179450
Email:[email protected]
Add:Zhengdong New District,Zhengzhou City,China.